Google Translation

3T MACHINE – FUEL

10:15 AM | Labels: , , , ,

Now the 3T auto mobile is ready to move. But it needs fuel. It is designed to take and use 2 types of fuel. 
What are they?

2 Fuel for the 3T Machine
Imagine a canal where there is flow of water. The water that flows through the canal provides nutrients and vital energy for the plants. Similarly there are 2 canals in the body through which fuel for the body flows.


 

 
These two fuel, right from the beginning of our manufacture in the factory (mother’s womb), to the time it is transferred to the permanent garage (death) are essential. Of these two we can survive without food for some days. But it’s impossible to survive if the air canal is shut down for even a few seconds more than you can sustain. Both these fuel are delivered to the Pumping Station (Heart) 

from where total distribution to the body takes place. As is with your auto mobile, the human 3T Machine auto mobile also uses these fuel, converts them into energy and removes what is not used.

THIS ENERGY IS PROVIDED TO
EVERY CELL IN THE ORGANS
WHEN EVERY CELL IS ENERGISED
EVERY ORGAN IS ENERGISED
THEREFORE CELL HEALTH IS PARAMOUNT


Air, Food Canals 
The air canal carries Oxygen inside and removes Carbon Dioxide. Food Canal carries water and food. So the essential Life Materials are:


Process Materials
In order to convert these fuel into energy, there are process materials provided as default inside the body. These are enzymes, acid, hormones, etc.

These process materials help in DARE :
Digestion
Assimilation
Respiration

Elimination

 
All these must be in balance. Any excess or shortage will create problems for DARE.


What happens apart from DARE?

The next blog will tell you that!
 



  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments(0)

3T HUMAN MACHINE – 8 ROUNDS

2:28 PM | Labels: , , , ,

We have seen that our body is like an umbrella, with a round at the top (head) and a stick (spinal cord) to hold it. Also for the umbrella (body) to be stable on the ground, it’s made of 8 Rounds. 
What are these?

Human Body – 8 Round Umbrella
Imagine an umbrella. On either side of the stick place the rounds in order.



You cannot expose the umbrella naked. Therefore it is dressed up by a material called SKIN - also of course made of the basic raw material the ‘CELL’.

Now keep the umbrella straight on the ground. There, in the place of the umbrella you can see YOU.
This is how the Human 3T Machine has been constructed. This is the easiest way of understanding our body.


Connecting Wires
Now that the outer and inner hardware is ready, 
they need to be connected inside. For that, wires known as NERVES are used. These nerves run all through the body. They are not simple wires. They are LIVE WIRES. They serve as POSTMAN of the body, carrying messages and delivering them to the right places.

Mobility 
The car may be new, but the utility of the car is in its movement. A stationary car is just a show piece. It has to be mobile. Similarly the 3T Machine also needs to be mobile, namely, move. While moving, it has to bend as per need. Therefore joints with strong, long, short sticks (BONES) have been made and kept at the appropriate places. Bones can’t be exposed and therefore they are showcased in muscles. So when we say, “there is muscular movement, it means, movement with bones and muscles”.

Command Centre
For any activity in this world there must be a command centre. Like for a computer, CPU is the command centre. Similarly the CPU of the body is the BRAIN. This structure gives command for all actions of the body.

Coordination
Now the 3T Machine has to move. For that, command is required. A coordinated system has been designed. It’s a 3 Way Command :


If there is a mismatch anywhere in any of the 3 centres, movement of the body will be in deep trouble. Vehicle will stop! Then you will have to take it to the repair workshop (Doctor). When we say movement, it’s not just walking or sitting or standing alone, but movements of all internal parts as well. All the 8 Rounds have to move. Then and only then will your AUTO MOBILE be considered healthy.


Ok! The 3T Machine is ready to move, but it requires fuel... Smiley
 
Yes! Fuel will come in 
the next blog...
Until then see the beauty of your 
 UMBRELLA 


 

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments(0)

MAKING OF 3T MACHINE …Cont

7:25 PM | Labels: , , , ,

We have seen that the 3T human Machine has hardware and software and is made of 2 parts, namely, organs and systems. Hardware and software are only materials of construction. How the actual construction takes place, we will see now.

 
Like an umbrella

If you can visualize an umbrella, the body is exactly designed like one. Umbrella has a top and to hold, it has a stick. Our body is exactly the same. There is a Top (head) and a stick (Spinal Cord).


Construction: 8 Rounds
If the umbrella were to be kept on the floor without any support it might fall. The human umbrella also has to be kept on the floor and naturally it will also not be stable and fall. Therefore the construction engineer has used a technique of ROUNDS to keep it stable and not fall when kept on the floor. 

First he made 2 big Rounds below the Top (Head) on either side of the stick (Spinal Cord) and kept on the floor. But it was not balanced and therefore fell off. Then he put 2 more rounds below these two rounds similarly. Still the balance could not be obtained. Therefore he put 2 small rounds on either side below those two rounds. 
Now balance has come. But in order for the building to be strong it needs pillars. Therefore he made 2 more Rounds as pillars on either side of the stick at the bottom.  

So all in all the whole body is made of 
8 Rounds apart from the Top (Head).


Great! The building has been constructed and it’s sitting pretty and stable on the ground. 
  Glitter Text Generator at TextSpace.net 


Hardware is ready. These 8 + 1 Rounds should start working now. 
But before that we need to know, 


Well for that, let's wait for 
the next blog...




  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments(0)

MAKING OF 3T MACHINE

5:22 PM | Labels: , , , ,

We have learnt that the raw material required for making the 3T Machine is just a “cell”. Now we will proceed to see parts of the:


2 Parts
As you know that this world is made of “duality”, body parts are also made of dual nature. It has hardware and software. The hardware is known as “Structures or Organs” and the software that runs these organs is known as “Functions or System”. 
It’s like your bike or car. They are also made of parts and for the parts to work there are functions. These parts are however made of different materials. So for the automobile to work, both parts and functions have to work in coordination. So this is true for our 3T Machine.

Organs Formation
When the raw material “cell” was conceived, it was single. But it is so designed that this one cell starts replicating in the mother’s womb. Groups of these cells are known as “tissues” and groups of these tissues form as organs. These organs are in different shapes, sizes and functions. Since the basic unit is the cell, well-being of the organ or its longevity depends on the health of its cells. 
As is known that any machine has wear and tear, the 3T Machine also has wear and tear. As age increases the wear and tear exerts its effect on the cells and in turn on the organs and natural function of the hardware slows down. This is Part 1.

Organs Function 
Like the bike or car, the 3T Machine hardware (organs) requires materials for function. The function inducing software is known as “hormones” and these get activated when there are adequate “enzymes”.  
These hormones must be in balance. Imbalance of hormones sets pace for imbalance in the cells and that will affect the designated functions of the cells, in turn tissues and in turn organs. This inadequacy of functions is termed as “diseases”. This is Part 2.

Dis function or No function
When there is a dis function, it means cells in the organs are not doing their work and so a corrective action needs to be taken. This corrective action is known as “Treatment”. When there is no function of a single organ, nowadays treatment is available to replace certain organs, like kidneys, heart etc. But if there is multiple organs “no function” the 3T Machine will stop working and when this machine is no longer serviceable, it will be moved to a permanent garage from where it will not be retrieved. This is known as “Death”.
 
Cell Health
Now it’s clear that in order for the organs to function well, cells in the organs must function well. Minor dis functions will be there every day, but they should not escalate into major dis orders. Then for a long time cells will be healthy. 


When cells are healthy, 
organs are healthy

When organs are healthy, 
they serve for a long time

When they serve for a long time

YOU ME and ALL LIVE LONG

Living long is the Highest Desire of 
all Living Beings

 
(I am simplifying this complex subject with examples as much as possible so that a large number of people can understand in an easy way. Those for whom these are kindergarten material, kindly bear in the interest of many who are new to this subject spread across the world. If you are a trainer you can also use these materials for your sessions).


Expertise of a trainer is to simplify materials and present.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments(1)

MACHINE DESIGN – 3T MACHINE

6:02 PM | Labels: , ,

For making any material you require “raw materials”. For example, to make a car you require not one but a multitude of raw materials, like steel, rubber, leather, glass, plastic and so on and so forth. Even if one of these raw materials is deficient, the car cannot come out of the assembly line in the factory. This is the same case for every man made material in this world. After making it with all these multiple ingredients, still the man-made machine can neither talk, nor think nor treat by itself. However the 3T Machine i.e. the human machine is unique, in that it is made of a
 
Raw Material of the 3T Machine
When this machine was conceived in the factory (mother’s womb), it was designed with a single raw material called a “CELL”. The same single cell started multiplying into various parts, in different shapes, into different functions and different sizes. Each part (organ) has to do its designated duty by itself. Independent performance is designed for each organ. But they have to take help from other organs as well (teamwork) and maintain harmony (homeostasis) to function better.

So the first teamwork of the world started with the human body itself emphasizing the fact that if all humans are united and work in unison this world will be a Heaven here and now.
 
How 1 Cell, but different Organs, Functions, Sizes and Shapes? 
A rational question may arise in your mind as to how a single raw material, say a Cell can have different sizes, shapes and functions?

It’s like this; you have your own home. Before construction there was only a piece of land. After construction, you got a reception hall, a bedroom, a dining room, a kitchen, a washroom, and a prayer room and so on. The piece of land had got itself converted into different types of rooms, with different shapes, different sizes and different functions. One room’s function cannot be replaced by another room. 

Similarly our body also was a single cell. When constructed it became like a functioning body, with different sizes, shapes and functions. 

The human body is a complex network system, with unimaginable chemical reactions going on every microsecond.
 
As detailed above, the body works as follows :



In that sense the First Network created by God is 
the Human 3T Machine

 
It’s made of 2 parts.

 
You will have to await the next blog to find out more.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS
Read User's Comments(0)
Subscribe to: Posts (Atom)